<<
Back to
Instrumentation List
|
Pressure Control
Setup - BSPIL-IST-05027
Pressure Control Setup comprises of Pressure tank fitted with Pressure
transmitter to measure the pressure. The pressure is controlled by a pneumatic
control valve operated by a I to P converter. The input pressure is fed from air
compressor. The whole system is mounted on a Table top Model with all necessary
Piping.
The electronic panel comprises of ADC/DAC card with RS-232 interface. Displays
indicate the process value and set value in the PC through RS - 232 C Port
Software is provided for experimentation, PID Control settings (P, PI, PD and
PID mode) Data storing, Online data acquisition, Off line analysis, Printing of
data's can be done easily.
Specification :
Pressure Transmitter: 5 Kg/cm2 strain gauge based.
Output : 4 - 20m A
Pressure Tank : 2 Liter Capacity
Control Value : Globe 2 way ½" with Diaphragm type actuator, Total stem travel
18 mm, Air operated, 3 to 15 PSI pressure.
Air Regulator : ¼" BSP, for 0 to 15 PSI pressure
I/P Converter : 4 to 20mA input output 3 to 15 PSI
ADC/DAC Card : 12 bit resolution,8 input 1 output with Rs 232 Serial Interface
to PC.
PID Controller : Software to set P, PI, PID, PD Mode with Controller and
Acquisition, Trend plot, Offline, Analysis and Printing.
Download
PDF Format
|
