|
Machine
Vision System
This
system helps the operator/Students to see the
Machining Progress with the help of Digital Camera and the Personal
Computer and also analyze and measure the
visualized component after storing the image.
After visualizing
the component the same can be measured very accurately with Measurement System
the various dimensions of the component such
as length, width, Perimeter, dia,
angle etc.,
Metrology
Imaging
Computer:
-
Celeron
Processor (PIV)
-
80GB
HDD
-
17
inch Color Monitor
-
Scroll
Mouse
-
101
Key Board
-
Read
and Write - CDWR
-
1.4MB
FDD
The Accuracy :
1 Micron
The system comes
with Digital Camera 3 Million Pixel Tripod
Stand, PC, Software for Vision and Measurement.
Software
features
.Measurement
Tools.
(A).
Calibration :-
This
tools is for calibrating
through calibration scale.
This is done once while the system is integrated with Camera/Microscope/Adapter
and the Software. And the Calibration remain as Standards for any future Capture
and Study.
(B).
Length:-
This
is used
for measuring length .It can
measure any given length found
in the image with respect to any findings or portions thereof . It
calculates according
to your selected calibrated
scale name,
choosen from
the list of predetermined Magnification.
(C).
Angle:-
This is
used for measuring angles of
three selected point of the
captured image.
(D).
Perimeter:-
This is used for
measuring perimeter of
irregular shapes
(E).
Width:-
This is used
for measuring
width .It will give Minor
Width, Major Width and
Average Width too.
(F).
Radius:-
This is
used for
measuring three points
radius.
(G).
Area:-
This
is used for measuring area with respect to Manual
selection of a portion, Square, Rectangle, Oval and Circle.
(H).
Color:-
This enables to select a
Contrast Color for easy visualization and draw.
(I).
Counting:-
The Material Pro 3
enables automatic counting of particles. It has three intensity range for
counting such as manual , automatic and bright objects determination method. In
the process total count is derived, Max dia, Minimum Dia, Max Area, Min. Area
and Its percentage etc., based on the Area Range
in different color it can be
identified , Each Grain Particle can be distinguished and numbered
automatically, Label color can also be changed, . It is used to measure and
density parameters for the image objects (particles powders, inclusions, grains,
etc.)
|
