|
Francis
Turbine test rig - BSPIL-HML-20008
Francis Turbine test rig with 15 HP - Extra Fiber glass lining charge (FRP) for the above inside M.S
Tank
a) BSPIL francis Turbine with a rope brake dynamometer to develop 5 Hp at 1500 (50 feet) head for a flow of 2100
b) Pm (460gpm) complete with mounted pressure gauge and vacuum gauge supplied with a set of dead weights in metric units and spring balance. The turbine is designed for laboratoty experimental and study purpose and to conduct test in metric units consists of spiral casing, runner and shaft mounted on overhung ball and roller bearing guide blade and operating mechanism Perspex cylinder and draft tube all mounted on suitable
trame.
c) Centrifugal monoblock pump set suitable for the supply of water for Francis Turbine size 4*4 inch to discharge 2100 lpm (460 gpm ) at 12m (69 feet) head with 15 HP 2800 rpm. Squirrel induction motor 3 phase, 400/440 volts. A.C
supply.
d) Venturimeter size 100 mm dia to measure the discharge differential monometer to read lpm with mercury for the
venturimeter.
e) Piping system consisting of 100 cm (4 inches) pipes, valves, fittings, and a complete set suitable for a test
rig.
f) M.S sump of size 1m X 3m X 0.7 m to store sufficient water for independent circulation through the unit for experimentation arrange within the floor space of the main
unit.
g) Rigid M.S Frame completely fitted with all the above items a self sufficient package unit, suitable for operation without any foundation.
|
